Have a combi boiler with low water pressure how do I increase it ? - combi boiler rapidshare
They have a combination boiler, which worked well with 1.5 bar water pressure. Somehow the water pressure was lost and now reads 0 bar. How can the pressure of the water.
Monday, February 15, 2010
Combi Boiler Rapidshare Have A Combi Boiler With Low Water Pressure How Do I Increase It ?
5 comments:
U depends on the type they have.
Mine has 2 channels / lever pipes underneath.
I opened until the pressure builds up and then close it!
Among the boiler, a water tap slowly until the meter reads to make the correct pressure
Hello JDY
In general, up to a hose or pipe connecting two tubes at the bottom of the boiler, open the faucet / valve system to charge (you will see over the course of the pointer) and then clear again.
Put the kettle, but keep an eye on the pressure gauge, if it quickly falls back, then there is a leak somewhere in the system
Usually you can find a faucet valve on the boiler, it is clear that network from the cold water. It may be accompanied by a kind of braided hose to fill to the heater. Turn the soft touch of the valve, the pressure rises again to 1 bar 1 / 2.
When the pressure has decreased, it can be a problem (leak) with the heater or boiler itself
Look carefully at him.
Theres a valve below which in turn can see the pressure rise, but not more than 2 bar
Post a Comment